AVP_Matt - 11/17/2024 14:06

If you want to do that you'll need a STMM and all the associated cabling for it (implement cable, adapter, etc) to get it within a foot or so of the smart connector (Precision's version of the STMM). The smart connector can output the same seed tube data that it's reading, but what that requires depends on which model of smart connector. The old Gen 1 shouldn't take anything, the 37 pin plug for output should be on it. A Gen 2 will only have 1 37 pin for input, so it needs a small, separate module called a seed repeater. Most dealers probably have a few laying around and they're fairly inexpensive. A Gen 3, which you won't have on that planter at this point, but just for reference has a 37 pin for output like a Gen 1. All these outputs are pinned like a Deere planter harness so you'll need a compu-trak adapter for the STMM from AL.