Posted 11/27/2024 18:10 (#10985200 - in reply to #10984906) Subject: RE: Ontrac 3 vs 2+ currently ran by Integra or versa on wass
NW MN
cyclones30 - 11/27/2024 14:20
Had some motor clutch issues on the 2+ over the years. Not sure if the 3 was better or not on that
It was. The clutches have issues here too. OT3 has a brushless, clutchless design. It also has an encoder in the MDU so it knows exactly how far and how fast it is turning. Much better than the 2/2+ guess and go method.
Ontrac 3 vs 2+ currently ran by Integra or versa on wass
