|
Prairie Home MO | My rinse cycle when switching chemicals is:
150 gal H2O with tank clean. Agitate and rinsing for 30 min then spray off. Open valves and dump what’s left in tank.
Another 150 gal H2O with tank clean same way.
100 gal of H2O rinse/agitate for 15 min. Spray and dump what’s left. Pull screens and clean.
100 gal H2O rinse/agitate for 15 min and spray off. Dump what’s left out of tank. Open boom end valves and drain what’s in boom.
It’s prob overkill but it’s worked so far. | |
|
What have guys done to make cleaning/rinsing sprayer out easier ?
