AgTalk Home
AgTalk Home
Search Forums | Classifieds (51) | Skins | Language
You are logged in as a guest. ( logon | register )

Pro 700 and Integra
View previous thread :: View next thread
   Forums List -> Precision TalkMessage format
 
tedbear
Posted 2/20/2025 07:12 (#11113842 - in reply to #11113443)
Subject: RE: Pro 700 and Integra


Near Intersection of I-35 & I-90 Southern Mn.
swenzel - 2/19/2025 20:37

You can not pull GPS out of the Pro 700.

You are likely running a 372 or 262 GPS on your case 245 tractor. You can send the GPS signal from your 372 or 262 to the Integra. There is a port B and port C that you can connect to directly on the receiver. You can also pull GPS out of the Nav2 (or Nav3) controller. The GPS signal out of the nav controller is terrain compensated and the preferred method.

Personally I am biased and would like to say "switch steering of the tractor over to Ag Leader", but there is no technical reason you can't steer with the Pro700/373/nav2 and then have Ag Leader do planter monitoring and control.


I am biased also. I have no experience with the Pro 700 but I would agree on "switching the steering of this tractor to Ag Leader". We use an InCommand 1200 to run many aspects of our planter and also steer the tractor using Ag Leader's SteerCommand Z2. This works very well for us.

Switching things around for you might get a bit involved since you would be removing some equipment and installing other equipment. You would have the Nav II available for resale. There may be other factors in your farming situation that might affect the decision such as other tractors etc.

Edited by tedbear 2/20/2025 07:20
Top of the page Bottom of the page


Jump to forum :
Search this forum
Printer friendly version
E-mail a link to this thread

(Delete cookies)