|
| I am working with the Agleader IC800 display and an APV air seeder w/ 5.2 controller.
I am wanting to engage the seeder and log coverage on the InCommand with one switch. I am hoping someone can lead me in the right direction as far as the harness/module needed to do so.
I realize I will probably have to do some custom wiring. This seeder is running on a boom without any moving parts, so a traditional linkage switch won't work. Ideally, I would have a rocker switch in the cab that I can turn on/off that will log coverage/enage the seeder in one push.
| |
|
Agleader InCommand 800 coverage switch
